Description & applications
• Self-shielded flux-cored wire
• Designed for all positional welding of CMn steels thinner than 5 mm
• Used DC electrode negative, the wire produces a spray transfer and low spatter losses
• The arc is not affected by draughts or moderate wind
APPLICATIONS
FCW T11 is used for a wide range of general fabrication applications of mild and C-Mn steels in all positions. It is especially suited for fillet and lap joints in thin gauge mild steel sheet and for tacking and short run assembly welding.
Classification
| AWS A 5.20 | EN ISO 17632-A |
|---|---|
| E71T-11 | T 42 Z Z N 1 |
Typical weld metal composition (%)
| C | Mn | Si | Al |
|---|---|---|---|
| 0.1 | 0.5 | 0.3 | 1.4 |
All weld metal mechanical properties
| Rm (MPa) | Rp0.2 (MPa) | A5 (%) |
|---|---|---|
| 600 | 440 | 25 |
Operating conditions
| Diameter [mm] | Stick Out [mm] | Current type | Amperage [A] | Voltage [V] |
|---|---|---|---|---|
| 1.2 | 30-40 | DC(-) | 100-200 | 20-22 |
| 1.6 | 30-40 | DC(-) | 150-300 | 20-24 |
Welding positions
EN ISO 6947: PA, PB, PC, PD, PE, PF, PG
ASME IX: 1F, 1G, 2F, 2G, 3F, 3G, 4F, 4G, 5G
Packings & Diameters
| Diameters [mm] | 1.2 - 1.6 |
|---|---|
| Packing(s) | Spool BS300 |
| Weight [Kg] | 15 |
| Description | - |