FCW SB 22 9 3L
Description & applications
• Basic flux cored duplex stainless steel wire
• 22% chromium - 9% nickel - 3% molybdenum - nitrogen - low carbon duplex stainless steel deposit
• Exclusive slag system and fine tuning of the compositional balance insure good impact toughness levels
• Excellent weld metal quality and X-ray soundness
• Maximum performances in the horizontal and downhand positions
• Classical economical Ar-CO2 mixtures are used for welding
APPLICATIONS
Welding wrought, forged or cast duplex stainless steels for service in the as-welded condition when high impact toughness is required down to – 60°C. Heterogeneous welding between duplex stainless steels and other stainless and mild or low alloyed steels Welding wrought, forged or cast duplex stainless steels for service in the as-welded condition Heterogeneous welding between duplex stainless steels and other stainless and mild or low alloyed steels
Classification
| AWS A 5.22 | EN ISO 17633-A: | EN ISO 17633-B | ASME IX Qualification | Equivalent Material number |
|---|---|---|---|---|
| E2209T0-4 | T 22 9 3 N L Z M 3 | TS2209-FM0 | QW432 F-N° 6 / QW442 A-N° 8 | 1.4462 |
Typical weld metal composition (%)
| C | Mn | Si | Cr | Ni | Mo |
|---|---|---|---|---|---|
| 0.03 | 1.4 | 0.8 | 23.0 | >0.15 | 3.2 |
All weld metal mechanical properties
| Rm (MPa) | Rp0.2 (MPa) | A5 (%) | KCV |
|---|---|---|---|
| 790 | 610 | 26 | -60°C : 45 J |
Shielding gas
| M21 gas mixtures (Ar + 5 - 25% CO2) |
Operating conditions
| Diameter [mm] | Current type | Intensity [A] | Voltage [V] | Stick-out [mm] | Gas flow |
|---|---|---|---|---|---|
| 1.2 | DC (+) | 130-250 | 24-32 | 12-25 | 10 - 20 l/min |
| 1.6 | DC (+) | 150-300 | 24-33 | 12-25 | 10 - 20 l/min |
Welding positions
EN ISO 6947: PA, PB.
ASME IX: 1G, 1F, 2F.
Packings & Diameters
| Diameters [mm] | 1.2 | 1.2 - 1.6 |
|---|---|---|
| Packing(s) | Spool S200 | Spool BS300 |
| Weight [Kg] | 5 | 15 |
| Description | - | - |