Abranel 600S
Basic coated Inconel type electrode
Description & applications
Basic coated electrode with a NiCrFe type nickel base deposit. Used for repairing and joining of Nickel alloys, 5 % Nickel steels, cryogenic stainless steels (down to –196°C), Incoloy 800 and other high temperature steels. For joining dissimilar materials as stainless steels to low alloyed steels, stainless steels to Nickel alloys, for buttering of difficult to weld steels. Deposit insensitive to cracks, very good resistance against acids, salt and alkaline solutions, molten salt. Resistant in oxidizing and carburizing atmospheres (avoid a sulfurous atmosphere).
Main applications: Oven parts, burners, heat treatment equipment, cement works , moulds, tanks, transport and storage of liquid gas. Chemical industries, petrochemical industries, glassworks, civil engineering, repairing and maintenance workshops.
Note:”Inconel” and “Incoloy” are registered trade names of Inco Alloys.
|
UNS |
Alloys |
DIN |
Material N° |
|
K81340 |
9%Ni |
X8Ni9 |
1.5662 |
|
N06600 |
600 |
NiCr15Fe |
2.4816 |
|
N06601 |
601 |
NiCr23Fe |
2.4851 |
|
N08800 |
800 |
X10NiCrAlTi3220 |
1.4876 |
|
N08810 |
800H |
X5NiCrAlTi3120 |
1.4958 |
|
|
DS |
X8NiCrSi3818 |
1.4862 |
Classification
| AWS A5.11 | UNS | Werkstoff Nr. | EN ISO 14172 |
|---|---|---|---|
| E NiCrFe-3 | W 86182 | 2.4620 | E-Ni6182 (NiCr15Fe6Mn) |
Typical weld metal composition (%)
| C | Si | Mn | Cr | Nb | Fe | Mo | Ni |
|---|---|---|---|---|---|---|---|
| <0.04 | 0.4 | 6.0 | 16.5 | 2.0 | 6.0 | 0.2 | Rest |
All weld metal mechanical properties
| Rm (MPa) | Rp0.2 (MPa) | A5 (%) | KV (J) |
|---|---|---|---|
| >620 | >380 | >35 | +20°C >80; -196°C >65 |
Packaging data
| Dimension | 2.5x300 | 3.2x350 | 4.0x350 | 5.0x450 |
|---|---|---|---|---|
| Electr. / packet | 214 | 139 | 94 | 60 |
| Electr. / carton | 856 | 556 | 376 | 240 |
| Kg 1000 electr. | 18.7 | 36 | 53 | 108 |
| Packets / carton | 4 | 4 | 4 | 5 |
| Kg / packet | 4 | 5 | 5 | 6.5 |
| Kg / carton | 16 | 20 | 20 | 26 |
Amperes
| A | 50-70 | 70-95 | 90-120 | 120-160 |
|---|
Welding Instructions
Redrying 1 h at 250-300°C. Joints to weld must be clean, exempt from grease, cracks. Guide electrodes with a slight declination, weld with a short arc and prevent a high heat input by applying the stringer bead technique (weaving max. 2-3 times core wire diameter).
= +
