FCW AP G

Cored wire for self shielded metal arc hardfacing

Descripción y aplicaciones

• Cored wire for self shielded metal arc hardfacing

• Austenitic deposit with excellent work hardening properties

APPLICATIONS:

FCW AP G produces an austenitic and non magnetic weld deposit which has excellent work hardening properties. The degree of work hardening is dependent on the amount of impact on the rebuilt component. It is used for rebuilding components exposed to high impact or heavy loads and can be used on ferritic and austenitic steels including “Hadfield” manganese steel. Deposit can be multi-layered

Examples Railroad frogs, crusher rolls, hammers, steel mill rolls and all components where a work hardening deposit is desirable.

Clasificación

EN 14700
T Fe9

Análisis químico (%)

C Mn Si Cr Fe
0.4 16.0 0.5 14.0 Balance

Propiedades mecánicas

Hardness – 3-Layer deposit
Work hardened: 45-55 HRc

Gas protector

Current type DC (+)
Shielding Self shielded
M12 / M13 / M20 / M21

Parámetros de uso

Diameter [mm] Amperage [A] Voltage [V] Stick-out [mm] Gas flow [l/min]
1.2 100-300 24-32 12-25 10-20
1.6 150-300 34-32 12-25 10-20
2.0 200-400 24-32 12-30 10-20
2.4 250-450 24-32 12-30 10-20

Posición de soldadura

FCW AP G, up to Ø 1.6 mm, is suitable as well for downhand as for positional welding by adapting transfer mode and welding parameters as for solid wires.

Embalaje y diámetros

Diámetros [mm] 1.2 - 1.6 - 2.0 - 2.4 2.4 2.4
Embalaje Spool : BS 300 Coil : B 450 Drum
Peso [Kg] 15 25 Up to 330
Descripción - - -
Copyright 2014 - Abracor SA - all right reserved