FCW R58
Cored wire - Hardfacing
Eigenschaften und Anwendungsgebiete
• Tubular wire for gas shielded arc hardfacing
• Tough and hard martensitic deposit
APPLICATIONS
FCW R58 is used for hardfacing and preheat is required for multi-layer build-up work. Tough deposits with increasing hardness for touching up and repair of hot and cold working tooling. Can be heat treated by oil quenching and tempering.
Examples Plastic injection screws and moulds for polymers
Klassifizierung
| EN 14700 |
|---|
| T Fe3 |
Richtanalyse des Schweißgutes (%)
| C | Mn | Si | Cr | Mo | Ti | Fe |
|---|---|---|---|---|---|---|
| 0.35 | 1.2 | 0.5 | 6.8 | 2.2 | 3.0 | Rest |
Mechanische Gütewerte des Schweißgutes
| Hardness – 3-Layer deposit - As welded |
|---|
| 55-59 HRc |
Schutzgaz
| Current type | DC (+) |
|---|---|
| EN ISO 14175 | M12 / M13 / M20 / M21 |
Benutzungsbedingungen
| Diameter [mm] | Amperage [A] | Voltage [V] | Stick-out [mm] | Gas flow [l/min] |
|---|---|---|---|---|
| 1.2 | 100-300 | 24-32 | 12-25 | 10-20 |
| 1.6 | 150-300 | 24-32 | 12-25 | 10-20 |
| 2.0 | 200-400 | 24-32 | 12-30 | 10-20 |
| 2.4 | 250-450 | 24-32 | 12-30 | 10-20 |
Schweißpositionen
FCW R58, up to Ø 1.6 mm, is suitable for downhand as well as for positional welding by adapting transfer mode and welding parameters as for solid wires
Verpackung & Durchmesser
| Durchmesser [mm] | ≤ 2.4 mm | ≥ 2.4 mm | ≥ 2.4 mm |
|---|---|---|---|
| Durchmesser | Spool : BS 300 | Coil : B 450 | Drum |
| Gewicht [Kg] | 15 | 25 | Up to 330 kg |
| Beschreibung | - | - | - |